Konica Minolta Polygon Editing Tool - Manual (Page 101)

99
Chapter
2
File
Menu
900
910
File – Import – Digitizer – PC Card (When VIVID 900/910 is Selected)
Parameters for [File-Import-Digitizer-PC Card-Load] Dialog Box
Element name Enter the desired element name.
Reduction Rate Selects the reduction rate to be applied when importing the data. You can select any of the following:
“1/1”, “1/4”, “1/9”, “1/16”, or “No polygon”.
Fill Holes Selects whether the programs fill in holes when importing the data. If the setting is On, the pro-
gram will automatically generate points to fill in holes left by missing data.
Remove Selects which the data the program excludes when carrying out the import. Select from an of the fol-
lowing: “None”, “Boundary (B.)”, “5deg. & B.”, “10deg. & B.”, “15deg. & B.”, or “20deg. & B.”
None: Removal is not carried out when importing the data.
Boundary(B.): The program removes boundary points.
5deg. & B.,10deg. & B., 15deg. & B., 20deg. & B.:
The program removes boundary points, and also removes polygons within the
specified
angular range (5°, 10 °, 15°, or 20 °) to the view vector.
Filter None: The program does not perform filtering when importing the data.
Noise Filter (N.F.): When importing the data, the points that appear to be noise will be corrected
according to other data.
High Quality (H.Q.): The program filters out unreliable data. (Effective only when importing data
that was scanned using the VIVID 910.)
H.Q & N.F.: Applies both noise filter and high quality filter. (Effective only when importing
data that was scanned using the VIVID 910.)
n Deleting the Selected File ([Delete] button)
The [Delete] button is used to delete the selected file from the memory card.
Operating Procedure
Before starting the following procedure, make sure that the [File-Import-Digitizer-PC Card] dialog box is
displayed.
1 From the file list, select the name of the
file you want to delete.
2 Click the [Delete] button.
A message dialog box will appear.
3 Click the [Delete] button.
The file will be deleted.