Konica Minolta Polygon Editing Tool - Manual (Page 79)

77
Chapter
2
File
Menu
900
910
File – Import – Digitizer – One Scan (When VIVID 900/910 is Selected)
Parameters for [File-Import-Digitizer-One Scan] Dialog Box
AF Executes auto-focus.
Mono Displays a monochrome monitoring image.
Color Takes and displays a color picture.
Pitch Displays previously scanned pitch image. (This button appears only if you are using two inter-
connected VIVID units.)
General Tab
Distance Checking this checkbox sets [Distance] on.
Intensity Checking this checkbox sets [LD] and [Gain] on.
LD Sets the intensity of the laser beam.
Gain Sets the gain.
Focus Lock Locks the focus. When you select this item, the program automatically places checks in the [Dis-
tance] and [Intensity] checkboxes, and displays the currently set position, the current laser-beam
intensity, and the gain value.
Scan Executes scanning from the VIVID unit.
Color Read When you press this button after taking a scan, the program takes a color shot and updates the
picture on the display. This button is effective only after scanning, and only if [Use Texture] is
checked and [Auto Read] is unchecked.
Convert Use when you want the program to load camera data. Opens the [File-Import-Digitizer-One
Scan-Convert] dialogbox.
Export Export scanned data in various data formats.
Go Sequentially executes those of the following functions that are checked: [AF], [Scan], [Convert],
[Export], and [Close].
Camera 1 Tab Note that the program runs a SCSI check when the dialog tabs are generated. If the check re-
veals that two camera units are connected, the dialog will display a [Camera 2] tab as well as the
[Camera 1] tab. The control content of both tabs will be identical.
Log If this checkbox is checked, the program applies log correction for color data. Use when you
want to brighten up neutral color.
Smooth If this checkbox is checked, the program applies smoothing to color data. Use if illumination is
low and the image is unclear.
Dark IIf this checkbox is checked, the program applies dark correction to color data. Use if you are
getting striation-type noise in the images.
Color Level Checking this checkbox sets the program to use color exposure level.
Threshold Checking this checkbox sets the program to use a threshold for distance-image creation.
Fine/Fast Selects the scan mode.
Dynamic Range Expan-
sion Mode If this checkbox is checked, the program takes multiple shots so as to expand the dynamic range
and reduce data loss. This button is displayed only for the VIVID 910.
High Quality Mode If this checkbox is checked, the program includes display of low-reliability data. On the range im-
age, data for which laser intensity was too high appear in light gray, while data for which intensity
was too low are shown in dark gray. This checkbox appears only if you using the VIVID 910.
Use Texture Checking this checkbox enables use of color images when converting and exporting.
M
emo
Note that if you use the [Go] button, the program will automatically load color data after scan-
ning, regardless of whether [Auto Read] is checked.
Auto read Checking this checkbox enables auto-read operation. If auto-read is enabled, the program will load
data after scanning (after the [Scan] button is clicked), with no need to click the [Color Read] button.
Scan loop Sets the number of scan iterations when taking multiple scans.
Auto Load Parameters Causes the command to automatically load the parameter settings saved by the [Save Parameters]
feature.
Save Parameters Saves the parameter settings entered in the [Camera 1] tab.
Load Parameters Loads the parameter settings saved by the [Save Parameters] feature.