Konica Minolta Polygon Editing Tool - Manual (Page 134)

132
Chapter
2
File
Menu
910
File – Import – Digitizer – Easy Align
n Color Chart Calibration
Operating Procedure
To carry out the following procedure, you must first open the [File-Import-Digitizer-Easy Align] dialog.
1 Click the [Parameters] tab.
Note
The [Settings] button will not appear if [Auto Maker
Detection] is unchecked.
2 Click the [Settings] button.
The name of the button changes to [Calibra-
tion]. It is now possible to change the [Color
Level].
3 Place the supplied color chart same
position as the object to be scanned.
Set the lighting to the same conditions you will
use when carrying out the actual scan. Set the
color chart so that it is directly facing the VIVID
910 lens.
Note
To be sure that you scan only the chart and not any-
thing else, check the image shown in dialog to confirm
that you have placed the chart in the right place.
Color chart