Konica Minolta Polygon Editing Tool - Manual (Page 237)

235
Chapter
2
Tool
Menu
9i
910
900
700
300
n Measuring the Distance Between Two Points ([Points])
Use the following procedure to measure the distance between two specified points on the selected elment.
Parameters Returned When Measuring Distance Between Two Points ([Points])
Dist. Length of the straight line connecting the two points. (Yellow line in an element view window.)
dx Distance along x-axis between the two points. (Red arrow in an element view window.)
dy Distance along y-axis between the two points. (Green arrow in an element view window.)
dz Distance along z-axis between the two points. (Blue arrow in an element view window.)
Point 1 Coordinates of the first point. (First white point in an element view window.)
Point 2 Coordinates of the second point. (Second white point in an element view window.)
Operating Procedure
1 Check on the [Points] of the [Distances]
category.
2 Specify the first point on the element by
clicking on it.
The specified point is displayed in an element
view window.
M
emo
If you want to redo the point specifying, click the Right
mouse button at anywhere.
3 Specity the second point on the ele-
ment by clicking on it.
The distance between the two points is mea-
sured, and the calculated results will be dis-
played in the upperright window of the [Tool
– Measure] dialog box, and the two specified
points and line connecting them will be dis-
played in an element view window.
Tool – Measure