Konica Minolta Polygon Editing Tool - Manual (Page 238)

236
Chapter
2
Tool
Menu
9i
910
900
700
300
Parameters Returned When Measuring a Bounding Box ([Points])
Dist. Length of the diagonal across the bounding box. (Yellow line in an element view window.)
dx Length of bounding box in the x direction. (Red arrow in an element view window.)
dy Length of bounding box in the y direction. (Green arrow in an element view window.)
dz Length of bounding box in the z direction. (Blue arrow in an element view window.)
Point 1 Coordinate at one end of diagonal crossing the box. (White point in an element view window.)
Point 2 Coordinates at the other end of diagonal crossing the box. (White point in an element view win-
dow.)
n Measuring a Bounding Box ([Points])
Use the following procedure to measure the dimensions of the bounding box fitted to specified points on
the selected element.
M
emo
A “bounding box” is the rectangular box formed with the shortest boundary lines bounding the selected points.
Operating Procedure
1 Check on the [Points] of the [Distance]
category.
2 Select the points on the element by us-
ing the Select menu.
Ref. For details of Select commands, refer to page 157 to
166.
3 Click the Right mouse button.
The bounding box that covers the selected
points is calculated, and the culculated results
will be displayed in the upper-right window
of the [Tool – Measure] dialog box, and the
bounding box fitted to the specified points
will be displayed in an element view window.
Tool – Measure