Konica Minolta Polygon Editing Tool - Manual (Page 30)

28
Chapter
2
File
Menu
9i
910
900
700
300
File – Save as – Elements
Saving Element Data under a Different Name
This command is used to save the data selected in the element list under a different file name.
Operating Procedure
1 From the element list, select the
element to be saved.
Parameters for [File-Save As-Elements] Dialog Box
Save in Select the folder for saving file.
File name Input the name of file to save.
Save as type Select format for saving file.
M
emo
It is possible to select two or more elements by clicking
them while holding down the [Shift] or [Ctrl] key.
2 From the [File] menu, select [Save as]
and then click [Elements].
The [File-Save as-Elements] dialog box will
appear.
• If two or more elements have been selected, their
names will be displayed in the order they are
displayed in the element list.
3 If you want to change the file name,
enter a new file name.
Note
The file name must consist of alphanumeric characters
only.
Changing the file name will not cause the element
names to change.
4 Click the [Save] button.
The first element will be saved, and a dialog
box for the next element will appear.
• When all the elements are saved, the dialog box
will close.
• If you click the [Cancel] button, the next element
and subsequent elements will not be saved.
M
emo
By selecting “Element files Ver.1.x” from the [Save as
type] pull-down menu, the elements can be saved under
the format of the Utility Software VI-S1.
Note
If the elements are saved under the format of the Utility
Software VI-S1, data attached to the images may be lost.