Konica Minolta Polygon Editing Tool - Manual (Page 181)

179
Chapter
2
Edit
Menu
9i
910
900
700
300
Edit – Recalc LOD
Recalculating the Simplified Display Data
This command is used to recalculate the simplified display data of the element(s) selected in the element list.
Note
This feature is disabled if you have set [Use LOD] to “Off” in the File-Preferences dialog (Default Behavior tab).
M emo
The simplified display data is displayed, for example, while the camera is dragged. If recalculation is not performed, the
data in effect when the element(s) was simplified lastly will be displayed. If necessary, recalculate the simplified display
data after the data is edited.
Operating Procedure
1 From the element list, select the desired
element.
2 Click [Recalc LOD] on the [Edit] menu.
The simplified display data of the selected ele-
ment will be recalculated.
Note
An error message may appear if the selected element
contains an excessively small number of polygons.