SMC Networks TIGERSWITCH 10/100 - Manual (Page 98)

C
ONFIGURING THE
S
WITCH
2-66
- If ingress filtering is enabled, the interface will discard
incoming frames tagged for VLANs which do not include this
ingress port in their member set.
- Ingress filtering does not affect VLAN independent BPDU
frames, such as GVRP or STP. However, it does affect VLAN
dependent BPDU frames, such as GMRP.
• PVID – VLAN ID assigned to untagged frames received on the
interface. (Default: 1)
- If an interface is not a member of VLAN 1 and you assign its
PVID to this VLAN, the interface will automatically be added
to VLAN 1 as an untagged member. For all other VLANs, an
interface must first be configured as an untagged member
before you can assign its PVID to that group.
• Acceptable Frame Type – Sets the interface to accept all frame
types, including tagged or untagged frames, or only tagged
frames. When set to receive all frame types, any received
frames that are untagged are assigned to the default VLAN.
(Option: All, Tagged; Default: All)
- This field is read-only for the Web, and read/write for the CLI
(page 3-126).
• GVRP Status – Enables/disables GVRP for the interface. GVRP
must be globally enabled for the switch before this setting can
take effect. (See “Displaying Bridge Extension Capabilities” on
page 2-24.) When disabled, any GVRP packets received on this
port will be discarded and no GVRP registrations will be
propagated from other ports. (Default: Disabled)
- GVRP can only be enabled for tagged ports.
- You must set Mode to 1Q Trunk to configure a tagged port.
• GARP Join Timer* – The interval between transmitting
requests/queries to participate in a VLAN group. (Range:
20-1000 centiseconds; Default: 20)