SMC Networks TIGERSWITCH 10/100 - Manual (Page 63)

P
ORT
C
ONFIGURATION
2-31
• MAC Address – The physical layer address for this port.
- CLI only; to access this on the Web, see “Setting the IP
Address” on page -11.
• Trunk Member – Shows if port is a trunk member. (Port
Information only)
• Creation – Shows if a trunk is manually configured. (Trunk
Information only)
• Port Capabilities
*
– Specifies the capabilities to be advertised
for a port during auto-negotiation. The following capabilities
are supported:
- 10half - Supports 10 Mbps half-duplex operation
- 10full - Supports 10 Mbps full-duplex operation
- 100half - Supports 100 Mbps half-duplex operation
- 100full - Supports 100 Mbps full-duplex operation
- 1000full - Supports 1000 Mbps full-duplex operation
- Sym - Transmits and receives pause frames for flow control
- FC - Supports flow control
*To access this item on the Web, see “Configuring Interface Connections” on
page -32.
Web – Click Port, Port Information or Trunk Information.