SMC Networks TIGERSWITCH 10/100 - Manual (Page 189)

P
ORT
A
UTHENTICATION
C
OMMANDS
3-47
dot1x port-control
Sets the dot1x mode on a port interface. Use the no form to reset
to the default.
Syntax
dot1x port-control {auto | force-authorized |
force-unauthorized}
no dot1x port-control
• auto – Requires a dot1x-aware connected client to be
authorized by the RADIUS server. Clients that are not
dot1x-aware will be denied access.
• force-authorized – Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
• force-unauthorized – Configures the port to deny access to
all clients, either dot1x-aware or otherwise.
Default
force-authorized
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#