Radius-server port, Radius-server port -41 – SMC Networks TIGERSWITCH 10/100 User Manual
Page 183
A
UTHENTICATION
C
OMMANDS
3-41
Command Mode
Global Configuration
Example
radius-server port
Use this command to set the RADIUS server network port. Use the
no form to restore the default.
Syntax
radius-server port port_number
no radius-server port
port_number - RADIUS server UDP port used for
authentication messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server host 192.168.1.25
Console(config)#
Console(config)#radius-server port 181
Console(config)#