SMC Networks TIGERSWITCH 10/100 - Manual (Page 221)

IP C
OMMANDS
3-79
Example
To show all lines, enter this command:
IP Commands
There are no IP addresses assigned to this switch by default. You
must manually configure a new address to manage the switch over
your network. You may also need to a establish a default gateway
between this device and management stations that exist on
another network segment.
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Vty configuration:
Password threshold: 3 times
Interactive timeout: 65535
Console#
Command Function Mode Page
ip address Sets the IP address for this device IC 3-80
ip dhcp restart Submits a BOOTP or DCHP client request PE 3-81
ip
default-gateway Defines the default gateway through
which an in-band management station can
reach this device GC 3-82
show ip
interface Displays the IP settings for this device PE 3-83
show ip
redirects Displays the default gateway configured
for this device PE 3-84
ping Sends ICMP echo request packets to
another node on the network NE,
PE 3-84