SMC Networks TIGERSWITCH 10/100 - Manual (Page 66)

C
ONFIGURING THE
S
WITCH
2-34
Web – Click Port, Port Configuration or Trunk Configuration.
Modify the required interface settings, and click Apply.
CLI – Select the interface, and then enter the required settings.
Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is
malfunctioning, or if application programs are not well designed
or properly configured. If there is too much broadcast traffic on
your network, performance can be severely degraded or
everything can come to complete halt.
Console(config)#interface ethernet 1/3 3-89
Console(config-if)#description RD SW#13 3-90
Console(config-if)#shutdown 3-98
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
3-92
Console(config-if)#speed-duplex 100half 3-90
Console(config-if)#flowcontrol 3-94
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
3-93
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#