SMC Networks TIGERSWITCH 10/100 - Manual (Page 231)

I
NTERFACE
C
OMMANDS
3-89
interface
Use this command to configure an interface type and enter
interface configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
• vlan vlan-id (Range: 1-4094)
Default Setting
None
Command Mode
Global Configuration
Example
To specify port 25, enter the following command:
show
interfaces
counters Displays statistics for the specified interface NE,
PE
3-100
show
interfaces
switchport Displays the administrative and operational
status of an interface NE,
PE 3-102
Console(config)#interface ethernet 1/25
Console(config-if)#
Command Function Mode Page