SMC Networks TIGERSWITCH 10/100 - Manual (Page 240)

C
OMMAND
L
INE
I
NTERFACE
3-98
clear counters
Use this command to clear statistics on an interface.
Syntax
clear counters interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command
sets the base value for displayed statistics to zero for the
current management session. However, if you log out and back
into the management interface, the statistics displayed will
show the absolute value accumulated since the last power
reset.
Example
The following example clears statistics on Ethernet port 5.
Console#clear counters ethernet 1/5
Console#