SMC Networks TIGERSWITCH 10/100 - Manual (Page 226)

C
OMMAND
L
INE
I
NTERFACE
3-84
show ip redirects
Use this command to show the default gateway configured for
this device.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
ip default-gateway (3-82)
ping
Use this command to send ICMP echo request packets to another
node on the network.
Syntax
ping host [count count][size size]
• host - IP address or IP alias of the host.
• count - Number of packets to send. (Range: 1-16, default: 5)
• size - Number of bytes in a packet. (Range: 32-512,
default: 32)
The actual packet size will be eight bytes larger than the size
specified because the switch adds header information.
Default Setting
This command has no default for the host.
Console#show ip redirects
ip default gateway 10.1.0.254
Console#