SMC Networks TIGERSWITCH 10/100 - Manual (Page 241)

I
NTERFACE
C
OMMANDS
3-99
show interfaces status
Use this command to display the status for an interface.
Syntax
show interfaces status interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
• vlan vlan-id (Range: 1-4094)
Default Setting
Shows status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is
displayed. For a description of the items displayed by this
command, see “Displaying Connection Status” on page 2-30.