SMC Networks TIGERSWITCH 10/100 - Manual (Page 256)

C
OMMAND
L
INE
I
NTERFACE
3-114
Example
spanning-tree hello-time
Use this command to configure the spanning tree bridge hello time
globally for this switch. Use the no form to restore the default.
Syntax
spanning-tree hello-time time
no spanning-tree hello-time
time - Time in seconds. (Range: 1-10 seconds).
The maximum value is the lower of 10 or [(max-age / 2) -1].
Default Setting
2 seconds
Command Mode
Global Configuration
Command Usage
This command sets the time interval (in seconds) at which the
root device transmits a configuration message.
Example
Console(config)#spanning-tree forward-time 20
Console(config)#
Console(config)#spanning-tree hello-time 5
Console(config)#