SMC Networks TIGERSWITCH 10/100 - Manual (Page 159)

G
ENERAL
C
OMMANDS
3-17
example, the !2 command repeats the second command in the
Execution history buffer (config).
reload
Use this command to restart the system.
Note: When the system is restarted, it will always run the
Power-On Self-Test. It will also retain all configuration
information stored in non-volatile memory by the copy
running-config startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
Use this command to return to Privileged Exec mode.
Default Setting
None
Console#!2
Console#config
Console(config)#
Console#reload
System will be restarted, continue ? y