SMC Networks TIGERSWITCH 10/100 - Manual (Page 208)

C
OMMAND
L
INE
I
NTERFACE
3-66
• Some commands are only enabled for IGMPv2, including ip
igmp query-max-response-time and ip igmp
query-timeout.
Example
The following configures the switch to use IGMP Version 1:
show ip igmp snooping
Use this command to show the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Configuring IGMP Snooping Parameters” for a description
of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console(config)#ip igmp snooping version 1
Console(config)#
Console#show ip igmp snooping
Service status: Enabled
Query count: 2
Query max response time: 10 sec
Router port expire time: 300 sec
IGMP snooping version: Version 2
Console#