SMC Networks TIGERSWITCH 10/100 - Manual (Page 55)

M
ANAGING
F
IRMWARE
2-23
Web – Click System, Configuration. Enter the IP address of the
TFTP server, enter the name of the file to download, select a file
on the switch to overwrite or specify a new file name, and then
click Transfer from Server.
If you download to a new file name, select the new file from the
drop-down box for Startup Configuration File, and press Apply
Changes. To use the new settings, reboot the system with the
System/Reset command or reset power to the switch.
CLI – Enter the IP address of the TFTP server, specify the source
file on the server, set the startup file name on the switch, and then
restart the switch.
Console#copy tftp startup-config 3-20
TFTP server ip address: 10.1.0.19
Source configuration file name: config-1
Startup configuration file name [] : startup
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#reload
Console#