SMC Networks TIGERSWITCH 10/100 - Manual (Page 263)

VLAN C
OMMANDS
3-121
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the
network, but communicate as though they belong to the same
physical segment. This section describes commands used to create
VLAN groups, add port members, specify how VLAN tagging is
used, and enable automatic VLAN registration for the selected
interface.
Command Function Mode Page
Edit VLAN Groups
vlan database Enters VLAN database mode to add,
change, and delete VLANs GC 3-122
vlan Configures a VLAN, including VID,
name and state VC 3-123
Configure VLAN Interfaces
interface vlan Enters interface configuration mode for
a specified VLAN IC 3-124
switchport mode Configures VLAN membership mode for
an interface
IC 3-125
switchport
acceptable-frame-
types Configures frame types to be accepted
by an interface IC 3-126
switchport
ingress-filtering Enables ingress filtering on an interface IC 3-127
switchport native
vlan Configures the PVID (native VLAN) of
an interface IC 3-128
switchport
allowed vlan Configures the VLANs associated with
an interface IC 3-129
switchport gvrp Enables GVRP for an interface IC 3-140
switchport
forbidden vlan Configures forbidden VLANs for an
interface IC 3-130