SMC Networks TIGERSWITCH 10/100 - Manual (Page 71)

A
DDRESS
T
ABLE
S
ETTINGS
2-39
Setting Static Addresses
A static address can be assigned to a specific interface on this
switch. Static addresses are bound to the assigned interface and
will not be moved. When a static address is seen on another
interface, the address will be ignored and will not be written to the
address table.
Command Attributes
• Static Address Counts* – The number of manually configured
addresses.
• Current Static Address Table – Lists all the static addresses.
• Mode – Indicates if a packet with a destination address
matching an entry in the static address table will be forwarded
or discarded.
• Interface – Port or trunk associated with the device assigned a
static address.
• MAC Address – Physical address of a device mapped to this
interface.
• Duration – The address can be set to the following type:
- Permanent - Assignment is permanent, and restored after
the switch is reset.
- Delete on Reset - Assignment lasts until the switch is reset.
*Web Only