SMC Networks TIGERSWITCH 10/100 - Manual (Page 104)

C
ONFIGURING THE
S
WITCH
2-72
Web – Click Private VLAN, Private VLAN Configuration. Enter the
VLAN ID number, select Primary or Community type, then click
Add. To remove a private VLAN from the switch, highlight an entry
in the Current list box and then click Remove. Note that all
member ports must be removed from the VLAN before it can be
deleted.
CLI – This example configures VLAN 5 as a primary VLAN, and
VLAN 6 and 7 as community VLANs.
Associating Community VLANs
Each community VLAN must be associated with a primary VLAN.
Command Attributes
• Primary VLAN ID – ID of primary VLAN (1-4094, no leading
zeroes).
• Association – Community VLANs associated with the selected
primary VLAN.
• Non-Association – Community VLANs not associated with the
selected primary VLAN.
Console(config)#vlan database 3-122
Console(config-vlan)#private-vlan 5 primary 3-134
Console(config-vlan)#private-vlan 6 community
Console(config-vlan)#private-vlan 7 community
Console(config-vlan)#