SMC Networks TIGERSWITCH 10/100 - Manual (Page 153)

C
OMMAND
G
ROUPS
3-11
RADIUS Client Configures RADIUS client-server authentication for
logon access
3-38
Port
Authentication Configures IEEE 802.1x port access control 3-44
SNMP Activates authentication failure traps; configures
community access strings, and trap managers 3-54
IGMP
Snooping Configures IGMP multicast filtering, querier
eligibility, query parameters, and specifies ports
attached to a multicast router 3-61
Line Sets communication parameters for the serial port
and Telnet, including baud rate and console
time-out 3-68
IP Configures the IP address and gateway for
management access, displays the default gateway,
or pings a specified device 3-79
HOL Blocking
Prevention Enables head-of-line (HOL) Blocking Prevention
on the switch 3-86
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs 3-88
Rate Limiting Sets the maximum rate for traffic transmitted or
received on an interface 3-104
Address Table Configures the address table for filtering specified
addresses, displaying current entries, clearing the
table, or setting the aging time
3-106
Spanning Tree Configures Spanning Tree settings for the switch 3-111
VLAN Configures VLAN settings, defines port
membership for VLAN groups 3-121
PVLAN Enables or configures private VLANs 3-132
GVRP and
Bridge Extensi
on Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for bridge
extension MIB 3-140
Priority Sets port priority for untagged frames, also sets the
service weight for each priority queue based on
strict priority or Weighted Round Robin 3-146
Command
Group Description Page