SMC Networks TIGERSWITCH 10/100 - Manual (Page 244)

C
OMMAND
L
INE
I
NTERFACE
3-102
show interfaces switchport
Use this command to display advanced interface configuration
settings.
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is
displayed. The items displayed by this command include:
• Broadcast threshold – Shows if broadcast storm
suppression is enabled or disabled; if enabled it also shows
the threshold level (page 3-97).
• VLAN membership mode – Indicates membership mode as
Trunk or Hybrid (page 3-125).
• Ingress rule – Shows if ingress filtering is enabled or
disabled (page 3-127).
• Acceptable frame type – Shows if acceptable VLAN frames
include all types or tagged frames only (page 3-126).
• Native VLAN – Indicates the default Port VLAN ID (page
3-128).
• Priority for untagged traffic – Indicates the default priority
for untagged frames (page 3-146).