SMC Networks TIGERSWITCH 10/100 - Manual (Page 156)

C
OMMAND
L
INE
I
NTERFACE
3-14
Default Setting
Level 15
Command Mode
Normal Exec
Command Usage
• “super” is the default password required to change the
command mode from Normal Exec to Privileged Exec. (To set
this password, see the enable password command on page
3-29.)
• The “#” character is appended to the end of the prompt to
indicate that the system is in privileged access mode.
Example
Related Commands
enable password (3-29)
disable
Use this command to return to Normal Exec mode from privileged
mode. In normal access mode, you can only display basic
information on the switch's configuration or Ethernet statistics. To
gain access to all commands, you must use the privileged mode.
See “Understanding Command Modes” on page 3-7.
Default Setting
None
Command Mode
Privileged Exec
Console#enable
Password: [privileged level password]
Console#