SMC Networks TIGERSWITCH 10/100 - Manual (Page 242)

C
OMMAND
L
INE
I
NTERFACE
3-100
Example
show interfaces counters
Use this command to display statistics for an interface.
Syntax
show interfaces counters interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
Default Setting
Shows counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Console#show interfaces status ethernet 1/3
Information of Eth 1/3
Basic information:
Port type: 100TX
Mac address: 00-55-FF-FF-DD-E0
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 6 percent
Flow control: Disabled
Current status:
Link status: Down
Operation speed-duplex: 10half
Flow control type: None
Console#