SMC Networks TIGERSWITCH 10/100 - Manual (Page 193)

P
ORT
A
UTHENTICATION
C
OMMANDS
3-51
show dot1x
Use this command to show general port authentication related
settings on the switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access
control parameters that can be configured for this switch as
described in the preceeding pages, including reauth-enabled
(page 3-48), reauth-period (page 3-49), quiet-period (page
3-49), tx-period (page 3-50), and max-req (page 3-46). It also
displays the following global parameters which are set to a
fixed value, including the following items:
- supp-timeout– Supplicant timeout.
- server-timeout– Server timeout.
- reauth-max– Maximum number of reauthentication attempts.
• 802.1X Port Summary – Displays the port access control
parameters for each interface, including the following items:
- Status– Administrative state for port access control.
- Mode– Dot1x port control mode (page 3-47).
- Authorized– Authorization status (yes or n/a - not
authorized).