SMC Networks TIGERSWITCH 10/100 - Manual (Page 186)

C
OMMAND
L
INE
I
NTERFACE
3-44
Command Mode
Privileged Exec
Example
Port Authentication Commands
The switch supports IEEE 802.1x (dot1x) port-based access control
that prevents unauthorized access to the network by requiring
users to first enter a user ID and password for authentication.
Client authentication is controlled centrally by a RADIUS server
using EAPOL (Extensible Authentication Protocol Over LAN).
Console#show radius-server
Server IP address: 10.1.0.99
Communication key with radius server:
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#
Command Function Mode Page
authentication
dot1x Enables authentication on all switch
ports by setting the dot1x mode to
“Auto” GC 3-45
dot1x default Resets all dot1x parameters to their
default values GC 3-46
dot1x max-req Sets the maximum number of requests
the switch can send for the
authentication process before starting
the process again GC 3-46
dot1x port-control Sets dot1x mode for a port interface IC 3-47
dot1x
re-authenticate Forces a re-authentication on specific
ports PE 3-48
dot1x
re-authentication Enables re-authentication for all ports GC 3-48