SMC Networks TIGERSWITCH 10/100 - Manual (Page 275)

P
RIVATE
VLAN C
OMMANDS
3-133
To configure private VLANs, follow these steps:
1. Use the private-vlan command to designate one or more
community VLANs and the primary VLAN that will channel
traffic outside the community groups.
2. Use the private-vlan association command to map the
secondary (i.e., community) VLAN(s) to the primary VLAN.
3. Use the switchport mode private-vlan command to
configure ports as promiscuous (i.e., having access to all ports
in the primary VLAN) or host (i.e., having access restricted to
community VLAN members, and channeling all other traffic
through a promiscuous port).
4. Use the switchport private-vlan host-association command
to assign a port to a secondary VLAN.
5. Use the switchport private-vlan mapping command to
assign a port to a primary VLAN.
6. Use the show vlan private-vlan command to verify your
configuration settings.
switchport
private-vlan
host-association Associates an interface with a
secondary VLAN IC 3-137
switchport
private-vlan
mapping Maps an interface to a primary VLAN IC 3-138
Display Private VLAN Information
show vlan
private-vlan Shows private VLAN information NE,
PE 3-139
Command Function Mode Page