SMC Networks TIGERSWITCH 10/100 - Manual (Page 245)

I
NTERFACE
C
OMMANDS
3-103
• Gvrp status – Shows if GARP VLAN Registration Protocol is
enabled or disabled (page 3-140).
• Allowed Vlan – Shows the VLANs this interface has joined,
where “(u)” indicates untagged and “(t)” indicates tagged
(page 3-129).
• Forbidden Vlan – Shows the VLANs this interface can not
dynamically join via GVRP (page 3-130).
• Private-vlan mode – Indicates if this interface is set to host
mode or promiscuous mode (page 3-136).
• Private-vlan host-association – If this interface is set to
host mode, this field shows the associated primary and
secondary VLANs (page 3-137).
• Private-vlan mapping – If this interface is set to
promiscuous mode, this field shows the primary VLAN and
accessible secondary VLANs (page 3-138).
Example
This example shows the configuration for port 2 when set to host
mode for private VLANs.
Console#show interfaces switchport ethernet 1/2
Information of Eth 1/2
Broadcast threshold: Enabled, 6 percent
VLAN membership mode: Access
Ingress rule: Enabled
Acceptable frame type: All frames
Native VLAN: 3
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan:
2(u), 3(u),
Forbidden Vlan:
Private-vlan mode: Host
Private-vlan host-association: Primary_vlan_ID:
2,
Secondary_vlan_ID: 3
Private-vlan mapping: NONE
Console#