SMC Networks TIGERSWITCH 10/100 - Manual (Page 247)

R
ATE
L
IMIT
C
OMMANDS
3-105
rate-limit
Use this command to set the rate limit. Use the no form to remove
the rate limit.
Syntax
rate-limit {input | output} percent percent
no rate-limit input
• input - Sets the rate limit for inbound traffic.
• output - Sets the rate limit for outbound traffic
• percent - Sets the rate limit to predefined percentage of
bandwidth:
Default Setting
No limit
Command Mode
Interface Configuration (Ethernet, Port Channel)
Option Percentage (based on port type)
10 Mbps 100 Mbps 1000 Mbps
3 312K 3.12M 31.2M
6 625K 6.25M 62.5M
9 938K 9.38M 93.8M
12 1.25M 12.5M 125M
20 2M 20M 200M
40 4M 40M 400M
60 6M 60M 600M
80 8M 80M 800M