SMC Networks TIGERSWITCH 10/100 - Manual (Page 290)

C
OMMAND
L
INE
I
NTERFACE
3-148
Command Mode
Privileged Exec
Example
Mirror Port Commands
This section describes how to mirror traffic from a source port to a
target port.
port monitor
Use this command to configure a mirror session. Use the no form
to clear a mirror session.
Syntax
port monitor interface [rx | tx | both]
no port monitor interface
• interface - ethernet unit/port (source port)
- unit - Switch (unit 1).
- port - Port number.
• rx - Mirror received packets.
• tx - Mirror transmitted packets.
• both - Mirror both received and transmitted packets.
Console#sh queue mode
Wrr status: Enabled
Console#
Command Function Mode Page
port monitor Configures a mirror session IC 3-148
show port
monitor Shows the configuration for a mirror
port PE 3-149