SMC Networks TIGERSWITCH 10/100 - Manual (Page 137)

C
ONFIGURING
802.1
X
P
ORT
A
UTHENTICATION
2-105
Web – Select dot1x, dot1X Configuration. Enable dot1x globally for
the switch, modify any of the parameters required, and then click
Apply.
CLI – This example enables re-authentication and sets all of the
global parameters for dot1x.
Configuring a Port for Authorization
When dot1x is enabled, you need to specify the dot1x
authentication mode configured for each port.
Command Attributes
• Status – Indicates if authentication is enabled or disabled on
the port.
Console(config)#dot1x max-req 5 3-46
Console(config)#dot1x re-authentication 3-48
Console(config)#dot1x timeout quiet-period 40 3-49
Console(config)#dot1x timeout re-auth 5 3-49
Console(config)#dot1x timeout tx-period 40 3-50
Console(config)#authentication dot1x default radius 3-45
Console(config)#