SMC Networks TIGERSWITCH 10/100 - Manual (Page 185)

A
UTHENTICATION
C
OMMANDS
3-43
Command Mode
Global Configuration
Example
radius-server timeout
Use this command to set the interval between transmitting
authentication requests to the RADIUS server. Use the no form to
restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits
for a reply before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
show radius-server
Use this command to display the current settings for the RADIUS
server.
Default Setting
None
Console(config)#radius-server retransmit 5
Console(config)#
Console(config)#radius-server timeout 10
Console(config)#