SMC Networks TIGERSWITCH 10/100 - Manual (Page 172)

C
OMMAND
L
INE
I
NTERFACE
3-30
password to change the command mode from Normal Exec to
Privileged Exec with the enable command (page 3-13).
• The encrypted password is required for compatibility with
legacy password settings (i.e., plain text or encrypted) when
reading the configuration file during system bootup or when
downloading the configuration file from a TFTP server. There
is no need for you to manually configure encrypted passwords.
Example
Related Commands
enable (3-13)
ip http port
Use this command to specify the TCP port number used by the
Web browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser
interface. (Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Console(config)#ip http port 769
Console(config)#