SMC Networks TIGERSWITCH 10/100 - Manual (Page 168)

C
OMMAND
L
INE
I
NTERFACE
3-26
Example
Related Commands
dir (3-23)
whichboot (3-24)
System Management Commands
These commands are used to control system logs, passwords, user
names, browser configuration options, and display or configure a
variety of other system information.
Console(config)#boot system config: startup
Console(config)#
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for the
device GC 3-27
User Access Commands
username Establishes a user name-based
authentication system at login GC 3-27
enable
password Sets a password to control access to the
Privileged Exec level GC 3-29
Web Server Commands
ip http port Specifies the port to be used by the Web
browser interface GC 3-30
ip http server Allows the switch to be monitored or
configured from a browser GC 3-31
System Status Commands
show
startup-config Displays the contents of the configuration
file (stored in Flash memory) that is used
to start up the system PE 3-32
show
running-config Displays the configuration data currently
in use PE 3-34