SMC Networks TIGERSWITCH 10/100 - Manual (Page 279)

P
RIVATE
VLAN C
OMMANDS
3-137
Example
switchport private-vlan host-association
Use this command to associate an interface with a secondary
VLAN. Use the no form to remove this association.
Syntax
switchport private-vlan host-association secondary-vlan-id
no switchport private-vlan host-association
secondary-vlan-id - ID of secondary (i.e, community) VLAN.
(Range: 2-4094, no leading zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
All ports assigned to a secondary (i.e., community) VLAN can
pass traffic between group members, but must communicate
with resources outside of the group via a promiscuous port.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#switchport mode private-vlan promiscuous
Console(config)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#switchport mode private-vlan host
Console(config)#
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config)#