SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 546)

C
OMMAND
L
INE
I
NTERFACE
4-274
show map ip precedence
This command shows the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
map ip precedence (Global Configuration) (4 -269)
map ip precedence (Interface Configuration) (4 -270)
Console#show map ip precedence ethernet 1/5
Precedence mapping status: enabled
Port Precedence COS
--------- ---------- ---
Eth 1/ 5 0 0
Eth 1/ 5 1 1
Eth 1/ 5 2 2
Eth 1/ 5 3 3
Eth 1/ 5 4 4
Eth 1/ 5 5 5
Eth 1/ 5 6 6
Eth 1/ 5 7 7
Console#