SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 525)

VLAN C
OMMANDS
4-253
show interfaces protocol-vlan protocol-group
This command shows the mapping from protocol groups to VLANs for
the selected interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
• interface
- ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-24/48)
- port-channel channel-id (Range: 1-32)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for
protocol group 1 will be mapped to VLAN 2:
Console#show interfaces protocol-vlan protocol-group
Port ProtocolGroup ID Vlan ID
---------- ------------------ -----------
Eth 1/1 1 vlan2
Console#