SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 47)

B
ASIC
C
ONFIGURATION
2-9
3. At the Password prompt, also enter “admin.” (The password
characters are not displayed on the console screen.)
4. The session is opened and the CLI displays the “Console#” prompt
indicating you have access at the Privileged Exec level.
Setting Passwords
Note: If this is your first time to log into the CLI program, you should
define new passwords for both default user names using the
“username” command, record them and put them in a safe place.
Passwords can consist of up to 8 alphanumeric characters and are case
sensitive. To prevent unauthorized access to the switch, set the passwords
as follows:
1. Open the console interface with the default user name and password
“admin” to access the Privileged Exec level.
2. Type “configure” and press .
3. Type “username guest password 0 password,” for the Normal Exec
level, where password is your new password. Press .
4. Type “username admin password 0 password,” for the Privileged Exec
level, where password is your new password. Press .
Username: admin
Password:
CLI session with the SMC8748M is opened.
To end the CLI session, enter [Exit].
Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username admin password 0 [password]
Console(config)#