SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 138)

C
ONFIGURING THE
S
WITCH
3-82
CLI – This example sets the authentication mode to enable 802.1X on
port 2, and allows up to ten clients to connect to this port.
Console(config)#interface ethernet 1/2 4-174
Console(config-if)#dot1x port-control auto 4-106
Console(config-if)#dot1x re-authentication 4-108
Console(config-if)#dot1x max-req 5 4-106
Console(config-if)#dot1x timeout quiet-period 40 4-109
Console(config-if)#dot1x timeout re-authperiod 5 4-109
Console(config-if)#dot1x timeout tx-period 40 4-110
Console(config-if)#end
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized yes
1/2 enabled Single-Host Auto yes
.
.
.
1/48 disabled Single-Host ForceAuthorized n/a
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Enable
reauth-period: 5
quiet-period: 40
tx-period: 40
supplicant-timeout: 30
server-timeout: 10
reauth-max: 2
max-req: 5
Status Authorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-e0-29-94-34-65
Current Identifier 7
Authenticator State Machine
State Authenticated
Reauth Count 0
Backend State Machine
State Idle
Request Count 0
Identifier(Server) 6
Reauthentication State Machine
State Initialize
.
802.1X is disabled on port 1/48
Console#