Table 3-13 mapping ip precedence -194, Figure 3-88 ip precedence priority -194, Command attributes – SMC Networks SMC TigerStack 1000 SMC8748M User Manual
Page 250
C
ONFIGURING
THE
S
WITCH
3-194
Service values (i.e., Precedence value 0 maps to CoS value 0, and so forth).
Bits 6 and 7 are used for network control, and the other bits for various
application types. ToS bits are defined in the following table.
Command Attributes
•
IP Precedence Priority Table – Shows the IP Precedence to CoS
map.
•
Class of Service Value – Maps a CoS value to the selected IP
Precedence value. Note that “0” represents low priority and “7”
represent high priority.
Web – Click Priority, IP Precedence Priority. Select an entry from the IP
Precedence Priority Table, enter a value in the Class of Service Value field,
and then click Apply.
Figure 3-88 IP Precedence Priority
Table 3-13 Mapping IP Precedence
Priority Level
Traffic Type
Priority Level
Traffic Type
7
Network Control
3
Flash
6
Internetwork Control
2
Immediate
5
Critical
1
Priority
4
Flash Override
0
Routine