SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 321)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-49
Example
Related Commands
ip ssh crypto host-key generate (4-51)
show ssh (4-54)
ip ssh timeout
This command configures the timeout for the SSH server. Use the no
form to restore the default setting.
Syntax
ip ssh timeout seconds
no ip ssh timeout
seconds – The timeout for client response during SSH negotiation.
(Range: 1-120)
Default Setting
10 seconds
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response
from the client during the SSH negotiation phase. Once an SSH session
has been established, the timeout for user input is controlled by the
exec-timeout command for vty sessions.
Example
Related Commands
exec-timeout (4-18)
show ip ssh (4-54)
Console#ip ssh crypto host-key generate dsa
Console#configure
Console(config)#ip ssh server
Console(config)#
Console(config)#ip ssh timeout 60
Console(config)#