SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 459)

I
NTERFACE
C
OMMANDS
4-187
Table 4-46 show interfaces switchport - display description
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 4-181).
LACP status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-194).
Ingress/Egress rate
limit Shows if rate limiting is enabled, and the current rate limit.
(page 4-191).
VLAN membership
mode Indicates membership mode as Trunk or Hybrid
(page 4-240).
Ingress rule Shows if ingress filtering is enabled or disabled
(page 4-242).
Acceptable frame
type Shows if acceptable VLAN frames include all types or
tagged frames only (page 4-241).
Native VLAN Indicates the default Port VLAN ID (page 4-243).
Priority for untagged
traffic Indicates the default priority for untagged frames
(page 4-259).
GVRP status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-256).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-244).
Forbidden VLAN Shows the VLANs this interface can not dynamically join
via GVRP (page 4-245).