SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 495)

S
PANNING
T
REE
C
OMMANDS
4-223
Default Setting
0
Command Mode
MST Configuration
Command Usage
The MST region name (page 4-222) and revision number are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
Example
Related Commands
name (4 -222)
max-hops
This command configures the maximum number of hops in the region
before a BPDU is discarded. Use the no form to restore the default.
Syntax
max-hops hop-number
hop-number - Maximum hop number for multiple spanning
tree. (Range: 1-40)
Default Setting
20
Command Mode
MST Configuration
Console(config-mstp)#revision 1
Console(config-mstp)#