SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 105)

S
IMPLE
N
ETWORK
M
ANAGEMENT
P
ROTOCOL
3-49
Command Attributes
• Trap Manager Capability – This switch supports up to five trap
managers.
• Current – Displays a list of the trap managers currently configured.
• Trap Manager IP Address – IP address of a new management station
to receive notification messages.
• Trap Manager Community String – Specifies a valid community
string for the new trap manager entry. Though you can set this string
in the Trap Managers table, we recommend that you define this string
in the SNMP Configuration page (for Version 1 or 2c clients), or define
a corresponding “User Name” in the SNMPv3 Users page (for Version
3 clients). (Range: 1-32 characters, case sensitive)
• Trap UDP Port – Specifies the UDP port number used by the trap
manager.
• Trap Version – Indicates if the user is running SNMP v1, v2c, or v3.
(Default: v1)
• Enable Authentication Traps – Issues a trap message to specified IP
trap managers whenever authentication of an SNMP request fails.
(Default: Enabled)
• Enable Link-up and Link-down Traps – Issues a trap message
whenever a port link is established or broken. (Default: Enabled)