Table 4-2, Configuration commands -9 – SMC Networks SMC TigerStack 1000 SMC8748M User Manual

Page 281

NTERING

OMMANDS

4-9

•

Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and
databits.

•

VLAN Configuration - Includes the command to create VLAN
groups.

•

Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.

To enter the Global Configuration mode, enter the command configure
in Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.

To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.

Console#configure
Console(config)#

Table 4-2 Configuration Commands

Mode

Command

Prompt

Page

Line

line {console | vty}

Console(config-line)#

4-13

Access
Control
List

access-list ip standard
access-list ip extended
access-list ip
mask-precedence
access-list mac
access-list mac
mask-precedence