SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 315)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-43
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
Example
Related Commands
ip http secure-server (4-41)
Telnet Server Commands
ip telnet server
This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
Syntax
[no] ip telnet server
Console(config)#ip http secure-port 1000
Console(config)#
Table 4-14 Telnet Server Commands
Command Function Mode Page
ip telnet server Allows the switch to be monitored or
configured from Telnet GC 4-43
ip telnet server port Specifies the port to be used by the Telnet
interface
GC 4-44